Die Cutter

1050T/1300T/1500T/1650T
1050MT/1300MT/1500MT/1650MT
Automatic Die Cutting Hot Stamping Machine

IR-LENSES

IR Optics is a precise optic component that can cope with the IR wavelength & is made of special materials used for UV & IR. Our IR Optical Lenses are high-quality spheres for the near, middle, and far infrared ranges (wavelength range from 3 µm to 5 µm & 8 µm to 12 µm) and are diamond-turned optics with excellent properties for a very wide range of applications.

  • Materials: Germanium/ Silicon/ ZnSe/ MgF2/ CaF2/ Saphire/ ZnS

  • Shapes: Sphere/ Aspheric/ Plano/ Diffractive

  • Coatings: UV/ NIR/ SWIR/ MWIR/ LWIR/ Reflective/ Protective

Silicon Carbide Lenses

Silicon-Carbide-Lenses

Our Silicon Lenses are high-quality spheres for the near, middle, and far infrared ranges (wavelength range from 3 µm to 5 µm & 8 µm to 12 µm) and are diamond-turned optics with excellent properties for a very wide range of applications. Khyati Traders has the complete infrastructure for the production of Silicon Lenses with Aspheric, Aspheric Diffractive, as well as Spherical profiles, can be made with the utmost accuracy and precision. Materials such as Germanium, Calcium Fluoride, Zinc Sulphide and Zinc Selenide are also produced.​

Germanium Lenses

Germanium-Lenses

They are ideal for use in Mid-Wave Infrared and Long-Wave Infrared applications, including thermal imaging, spectroscopy, or FLIR. Due to thermal runaway, or the decrease in transmission as temperature increases, Germanium lenses should be used at temperatures below 100 °C. Germanium’s high density (5.33 g/cm3) should be considered when designing for weight-sensitive systems.

Zinc Sulphide Lenses

Zinc-Sulphide-Lense

Khyati Traders supplies a range of quality Zinc Sulphide optical components, including Zinc Sulphide lenses. Zinc Sulphide (ZnS) is a widely used IR-transmitting material used for windows, lenses, and other optical components. The material transmits at about 50% between 0.4 -12 μm before dropping off to zero transmission at around 15 μm. Its low absorbance in the IR spectrum makes it suitable for CO2 lasers operating at 10.6 μm. Zinc Sulphide has a pale yellow appearance and a hardness of HK160. Although the material is resistant to thermal shock, it is not recommended for harsh environments. Zinc Selenide is used in the form of optical windows in FLIR (Forward Looking Infrared) systems, as meniscus, spherical, or cylindrical lenses, and as resonator windows in CO2 lasers.

Diameter 10 to 200 mm
Diameter Tolerance ± 0.005
Center Thickness Tolerance ± 0.008
Focal Length Tolerance ± 2%
Surface Quality 40:20
Surface Irregularity 1 Fringe @ 633 nm

Optics Domes

Optics-Domes

Khyati Traders offers an extensive range of domes of standard sizes for visible & IR applications.

  • Custom domes are available from 50mm to 400mm in diameter.

  • Domes are AR-coated for improved transmission.

  • Materials Processed are ZnS, Sapphire, & BK7.

Gyro Blocks

Gyro-Blocks

Typical materials used are Zerodur, Astro-Sital Fused Silica, Bk7, Ohara, & Schott.

  • Hole roughness up to Ra0.3

  • Surface Finish up to 5 Å

  • Surface Flatness up to λ/20

  • Dimension tolerance up to ±2 microns

  • Dimension range: up to 15mm-150mm

1050T/1300T/1500T/1650T
1050MT/1300MT/1500MT/1650MT
Automatic Die Cutting Hot Stamping Machine

  • It adopts high-speed paper feeding feeder, which has high paper feeding precision, good stability, durability, and quick performance.

  • Non-stop paper feed and auxiliary receiving mechanism shorten auxiliary time and improve work efficiency.

  • The overall adjustment structure of the paper feeding table flip frame is precise, fast, and stable.

  • The hot stamping function inputs data through the industrial tablet touch screen and realizes second-generation automatic optimization programming by skipping steps, saving anodized aluminum foil to achieve no big or small steps and a single even step.

  • The twelve heating zones can be set independently and controlled by constant temperature, adapting to more complex electrochemical aluminum transfer printing effects, saving energy, and ensuring constant temperature stability.

Technical Parameters

Model 1050T 1300T 1500T 1650T
Max. Paper Size (mm) 1050×750 1300×980 1500×1100 1650×1200
Min. Paper Size (mm) 400×360 470×400 500×420 550×500
Max. Cutting Size (mm) 1040×730 1290×970 1480×1080 1645×1200
Die Chase Inner Size (mm) 1148×795 1392×1025 1590×1160 1745×1215
Cutting Plate Size (mm) 1080×736 1320×982 1500×1100 1620×1216
Max. Foil Stamping Size (mm) 1040×720 1285×960 1480×1070 1610×1160
Min. Gripper Length (mm) 8 8 10 10
Cutting Precision (mm) ±0.1 ±0.1 ±0.2 ±0.25
Foil Stamping Precision (mm) ≤±0.125 ≤±0.125 ≤±0.2 ≤±0.25
Max. Cutting Pressure (T) 350 350 420 420
Max. Cutting Speed (s/h) 7500 6000 5500 5200
Max. Foil Stamped Speed (s/h) 7500 6000 5500 5200
Max. Foil Roll Diameter (mm) Φ200 ~ 250 Φ250 Φ250 Φ300
Vertical Foil Roll Width (mm) 50 ~ 1060 50 ~ 1285 50 ~ 1480 50 ~ 1630
Horizontal Foil Roll Width (mm) 50 ~ 760 50 ~ 960 50 ~ 1070 50 ~ 1180
Vertical Foil Roll Shaft (pcs) 3 3 3 3
Horizontal Foil Roll Shaft (pcs) 2 2 2 2
Controllable Temperature Area (pcs) 18 18 18 24
Temperature Range (°C) 50 ~ 199 50 ~ 199 50 ~ 199 50 ~ 199
Pre-Stacking Height (mm) 1550 1400 1500 1500
Delivery Pile Height (mm) 1450 1400 1500 1500
Cardboard Paper (g/m²) 0.1 ~ 2 0.12 ~ 2 0.12 ~ 2 0.12 ~ 2
Corrugated Paper (mm) < 4 < 4 < 8 < 9
Main Motor Power (kw) 11 15 16 18.5
Heating Area Power (kw) 24 36 48 48
Total Power (kw) 60 84 84 96
Machine Weight (T) 18.5 23 29 32
Dimension (mm) 5880(+1650)×2550(+1800)×2680 7300(+1800)×3100(+1900)×2700 7670(+2000)×3100(+2200)×3000 8650(+2300)×4030(+2300)×3350

1050C/1060C/1300C/1500C
1650C/1900C/2200C
Automatic Die Cutting Machine

  • Imported thin paper conveying belt, strong and durable.

  • Non-stop paper feed and auxiliary receiving mechanism, shorten auxiliary time, improve work efficiency.

  • The paper pressing brush in the delivery part is an external all-round adjustment mechanism, which facilitates and effectively adjusts the delivery structure.

  • Main drive uses synchronous belt (vertical intermittent), equipped with overload torque controller.

  • The front guide, side guide and paper feeder fine-tuning device make the paper positioning more accurate.

  • The scraping frame adopts a three-frame linkage structure of upper, middle and lower frames, and the frame can be pulled out to install the plate, making adjustment of the scrapping part more convenient and safe.

  • Optional cleaning needle or the male and mother boards for cleaning.

  • Optional high-efficiency pre-assembled table unit.

Technical Parameters

Model 1050C 1300C 1500C 1650C
Max. Paper Size (mm) 1050x750 1300x980 1500x1100 1650x1200
Min. Paper Size (mm) 400x360 470x400 500x420 550x500
Max. Cutting Size (mm) 1040x730 1290x970 1480x1080 1645x1200
Die Chase Inner Size (mm) 1144x760 1330x992 1540x1100 1660x1215
Cutting Plate Size (mm) 1080x736 1320x982 1500x1100 1670x1215
Min. Gripper Length (mm) 8 8 10 10
Cutting Precision (mm) ≤±0.1 ≤±0.1 ≤±0.2 ≤±0.25
Max. Cutting Pressure (T) 350 350 420 420
Max. Cutting Speed (s/h) 7500 5000 4800 4500
Pre-Stacking Height (mm) 1550 1400 1300 1500
Delivery Pile Height (mm) 1400 1200 1200 1300
Cardboard Paper (g/m²) 0.1 ~ 2 0.2 ~ 2 0.25 ~ 2 0.3 ~ 2
Corrugated Paper (mm) < 4 < 8 < 8 < 9
Main Motor Power (KW) 11 11 15 15
Total Power (KW) 17.8 17.8 22 22
Machine Weight (T) 18 20.5 22.5 27
Dimension (mm) 5880(+1650)×2100(+1600)×2350 7200(+1800)×2350(+1900)×2650 7900(+2000)×2850(+2200)×3000 8650(+2300)×3300(+2300)×2850

1300X/1500X 1650X/1900X/2200X
Down Suction Feeding Die Cutting Machine

  • High strength gripper teeth, advanced open teeth gripper mechanism can adapt to various types of corrugated board. The front and back positioning and side positioning mechanism ensure the die-cutting accuracy of the paper.

  • High precision clearance mechanism, high die cutting accuracy, smooth operation.

  • Adopt domestic advanced ternary CAM indexing mechanism, pressure regulating device, pneumatic locking plate, overload protection device. Imported high precision chain drive.

  • Automatic paper receiving and paper matching device makes paper receiving convenient and neat.

Features of Die Cutter Machines

  • Perfect design, fine assembly, good stability, strong safety and low noise.

  • Non-stop paper feeding, precoded paper pile and auxiliary paper delivery mechanism shorten auxiliary time and improve work efficiency.

  • The front guide, side guide and paper feeder fine-tuning device make the paper positioning more accurate.

  • The die-cutting plate frame and bottom plate mechanism are humanized and designed to make plate installation and adjustment quick and convenient.

  • The circulating cooling oil supply system ensures that the moving parts of the machine are well lubricated and durable.

  • Photoelectric level control of double sheets, crooked sheets, and empty sheets ensures accurate and stable paper and reduces waste.

  • The timing and quantitative automatic oil supply system ensures that other moving parts of the machine are fully lubricated and has a long service life.

Technical Parameters

Model 1300X 1500X 1650X 1900X 2200X
Max. Paper Size (mm) 1300x980 1500x1100 1650x1200 1900x1600 2200x1600
Min. Paper Size (mm) 470x450 500x450 550x500 800x600 800x600
Max. Cutting Size (mm) 1290x970 1480x1080 1645x1200 1880x1580 2180x1580
Die Chase Inner Size (mm) 1330x992 1540x1100 1660x1215 1922x1620 2222x1620
Cutting Plate Size (mm) 1320x982 1500x1100 1670x1215 1922x1600 2222x1600
Min. Gripper Length (mm) 8 10 10 10 10
Cutting Precision (mm) ≤±0.1 ≤±0.2 ≤±0.25 ≤±0.3 ≤±0.3
Max. Cutting Pressure (T) 350 420 420 500 500
Max. Cutting Speed (s/h) 5000 4800 4500 4200 3800
Pre-Stacking Height (mm) 300 300 420 500 500
Delivery Pile Height (mm) 1200 1200 1300 1600 1600
Cardboard Paper (g/m²) / / / / /
Corrugated Paper (mm) < 8 < 8 < 9 ≤±11 ≤±11
Main motor power (KW) 11 15 18.5 22 22
Total Power (KW) 17.8 22 22 45 45
Machine Weight (T) 18 20 24 45 52
Dimension (mm) 5800(+1800)×2500(+1900)×2350 mm 6150(+2000)×2800(+2200)×2550 mm 6750(+2300)×3200(+2300)×2850 mm 10000(+2500)×3250(+2800)×3000 mm 10000(+2500)×3700(+3300)×3000 mm

800/800C/800T
Automatic Die Cutting Machine

  • Worm gear, worm and crankshaft transmission technology, high die-cutting pressure, and long service life.

  • Using European technology feeder head, the paper suction is adjustable, stable and accurate, and the paper has strong applicability.

  • The electrical control modular design uses imported electrical components to ensure precise control and good reliability.

  • (Optional) Three-frame linkage mechanism for waste removal function, humanized design, fast and convenient to install and adjust waste removal plates.

Technical Parameters

Model 1050C 1300C 1500C 1650C
Max. Paper Size (mm) 1050x750 1300x980 1500x1100 1650x1200
Min. Paper Size (mm) 400x360 470x400 500x420 550x500
Max. Cutting Size (mm) 1040x730 1290x970 1480x1080 1645x1200
Die Chase Inner Size (mm) 1144x760 1330x992 1540x1100 1660x1215
Cutting Plate Size (mm) 1080x736 1320x982 1500x1100 1670x1215
Min. Gripper Length (mm) 8 8 10 10
Cutting Precision (mm) ≤±0.1 ≤±0.1 ≤±0.2 ≤±0.25
Max. Cutting Pressure (T) 350 350 420 420
Max. Cutting Speed (s/h) 7500 5000 4800 4500
Pre-Stacking Height (mm) 1550 1400 1300 1500
Delivery Pile Height (mm) 1400 1200 1200 1300
Cardboard Paper (g/m²) 0.1 ~ 2 0.2 ~ 2 0.25 ~ 2 0.3 ~ 2
Corrugated Paper (mm) < 4 < 8 < 8 < 9
Main Motor Power (KW) 11 11 15 15
Total Power (KW) 17.8 17.8 22 22
Machine Weight (T) 18 20.5 22.5 27
Dimension (mm) 5880(+1650)×2100(+1600)×2350 7200(+1800)×2350(+1900)×2650 7900(+2000)×2850(+2200)×3000 8650(+2300)×3300(+2300)×2850

1300V/1500V 1650V/1900V/2200V
Frontline Paper Feeding Die Cutting Machine

  • Adopt domestic advanced ternary CAM indexing mechanism, pressure regulating device, pneumatic locking plate, overload protection device. Imported high precision chain drive.

  • The paper feed adopts the front feed mode and the secondary positioning mechanism, which reduces the requirement of paper. The worker's hands are far away from the die cutting part of the machine to ensure the safety of the worker's work.

  • Programmable controller and man-machine interface, digital display machine working speed, machining total running time, machine fault display make troubleshooting operation very convenient. The automatic control and real-time monitoring of each part of paper feeding, die-cutting and receiving are realized. With the safety device of each part, the operation is safe and reliable, and the machine adjustment and troubleshooting are convenient and fast.

  • Pneumatic clutch, combined with stable and reliable separation, small braking Angle, can transmit large torque.

Technical Parameters

Model 1300V 1500V 1650V 1900V 2200V
Max. Paper Size (mm) 1300x980 1500x1100 1650x1200 1900x1600 2200x1600
Min. Paper Size (mm) 470x420 500x465 550x500 800x600 800x600
Max. Cutting Size (mm) 1290x970 1480x1080 1645x1200 1880x1580 2180x1580
Die Chase Inner Size (mm) 1330x992 1540x1100 1660x1215 1922x1620 2222x1620
Cutting Plate Size (mm) 1320x982 1500x1100 1670x1215 1922x1620 2222x1600
Min. Gripper Length (mm) 8 10 10 10 10
Cutting Precision (mm) ≤±0.1 ≤±0.2 ≤±0.25 ≤±0.3 ≤±0.3
Max. Cutting Pressure (T) 350 420 420 500 500
Max. Cutting Speed (s/h) 5000 4800 4500 4200 3800
Pre-Stacking Height (mm) 300 300 420 500 500
Delivery Pile Height (mm) 1200 1200 1300 1600 1600
Cardboard Paper (g/m²) / / / / /
Corrugated Paper (mm) < 8 < 8 < 9 ≤±11 ≤±11
Main Motor Power (KW) 11 15 18.5 22 22
Total Power (KW) 17.8 22 24 45 52
Machine Weight (T) 18 20 24 45 52
Dimension (mm) 5880(+1800)x2500(+1900)x2350 mm 6150(+2000)x2800(+2200)x2550 mm 6750(+2300)x3200(+2300)x2550 mm 10000(+2500)x3250(+2800)x3000 mm 10000(+2700)x3300(+3000)x3000 mm

CONTACT US

Contact
BUSINESS QUERIES
HR Contact